How to Remove the Starter Motor

So, Today I removed the bad Starter from the 94 WRX, it is pretty easy if you have the right tools available. All you will need for this Removal/Install is the following:
- Flat Head Screwdriver
- Ratchet w/ extension
- 10, 12 & 14 mm Socket
- 17 mm Combination wrench
Optional
- Lighting Technician/tool biotch

So, first and foremost, REMOVE THE BATTERY TERMINALS!

This will prevent any electrical damage/injury.
Next, Remove the Inter Cooler. Three 12mm bolts, 2 left side 1 right side.

With a flat head, loosen the two clamps in the front and another under the Inter Cooler.

Now that it is out of the way, remove the Starter Terminal Cover.

Use the 12mm socket to take the nut and washer of the Starter Terminal. Just pull the other plug off.

There are two things attaching the starter to the engine, the 14mm bolt on top and a 17mm nut underneath the Starter. you can easily get the top one with a socket, but, the bottom one will require a combo wrench, unless you have a lift. I don't, so, i needed it doing this at home.

Hope this helped. to install just reverse the process, but, you will have to play around with the starter a bit, to get the splines to line up and for it to go in.